Cruiser Vortec L31 350” SBC! The Vortec L31 is the last iteration of the SBC 350 platform and provides us hot rodders with one of the ultimate starting points for builds with stock heads!
•BOTTOM END
-New Piston Rings
-New Main, Rod, and Camshaft Bearings
-Fresh Hone
-Bottom end torqued to spec and in sequence, crankshaft rotated by hand to check for binding, clearances looked good, thrust bearing set.
-New HPSV Oil Pump and Screen
-New 5QT Oil Pan
-One Piece Oil Pan Gasket
-New One Piece Rear Main Seal and Housing
-Summit Racing 12pt Crankshaft Bolt
•TOP END
-L31 Vortec Heads
-Light Valve Job
-New Valve Seals
-Comp Cams Beehive Valve Spring Set 26906-16
-Comp Cams Steel Spring Retainers
-.050 Keepers for correct installation height
-Cloyes Street True Roller Timing Chain Set
-Edelbrock Timing Cover
-ZZPerformance Hydraulic Roller Lifters
-Howard’s Cams 180305-08 Hydraulic Roller Camshaft
-229/229 @.050
-.480/.480 @.050
-Summit Racing Dual Plane Aluminum Intake
-HEI with added Summit Racing Melonized Gear
-Taylor Spark Plug Wires
-AC Delco Spark Plugs
-1.5 Ratio Rocker Arms
-Valves Lashed
-Heavy Duty Water Pump
-ALL New Gaskets Throughout
750 CFM Carb adds $300 to total
Cruiser Vortec L31 350” SBC! The Vortec L31 is the last iteration of the SBC 350 platform and provides us hot rodders with one of the ultimate starting points for builds with stock heads!
•BOTTOM END
-New Piston Rings
-New Main, Rod, and Camshaft Bearings
-Fresh Hone
-Bottom end torqued to spec and in sequence, crankshaft rotated by hand to check for binding, clearances looked good, thrust bearing set.
-New HPSV Oil Pump and Screen
-New 5QT Oil Pan
-One Piece Oil Pan Gasket
-New One Piece Rear Main Seal and Housing
-Summit Racing 12pt Crankshaft Bolt
•TOP END
-L31 Vortec Heads
-Light Valve Job
-New Valve Seals
-Comp Cams Beehive Valve Spring Set 26906-16
-Comp Cams Steel Spring Retainers
-.050 Keepers for correct installation height
-Cloyes Street True Roller Timing Chain Set
-Edelbrock Timing Cover
-ZZPerformance Hydraulic Roller Lifters
-Howard’s Cams 180305-08 Hydraulic Roller Camshaft
-229/229 @.050
-.480/.480 @.050
-Summit Racing Dual Plane Aluminum Intake
-HEI with added Summit Racing Melonized Gear
-Taylor Spark Plug Wires
-AC Delco Spark Plugs
-1.5 Ratio Rocker Arms
-Valves Lashed
-Heavy Duty Water Pump
-ALL New Gaskets Throughout
750 CFM Carb adds $300 to total
